Part Number (MPN)
17D1044CF2
UPC / GTIN
193468820386 / 00193468820386
Abutment Clips Included
No
Adhesive Backed Pad Shim
No
Brake Lubricant Included
No
FAQ - Answer 1
No, but it is a good idea to inspect them for wear-out, cracking, leaking etc.
FAQ - Answer 2
Yes, ACDelco also offers GM OE brake pads and Advantage brake pads.
FAQ - Answer 3
No, but it is a good idea to inspect your brake pads at each tire rotation.
FAQ - Answer 4
Yes, ACDelco Professional Disc Brake Pads come with a limited lifetime warranty.
FAQ - Question 1
Do I have to replace all my brake parts when replacing my brake pads?
FAQ - Question 2
Does ACDelco offer other grades of brake pads?
FAQ - Question 3
Do I have to replace my brake pads after a certain amount of time?
FAQ - Question 4
Are these brake parts durable?
Features & Benefits - Bullet 1
Integrally molded to backing plate for bond integrity
Features & Benefits - Bullet 2
Premium shims, slots, and chamfers can help to dimish noise, vibration, and braking harshness
Features & Benefits - Bullet 3
Stamped backing plate allows for proper pad movement within the caliper assembly, help reduce noise, brake pulsation, and helps to protect against premature wear
Features & Benefits - Bullet 4
Tested to SAE J2784 for braking effectiveness, along with Noise/Vibration/Harshness (NVH) and durability/wear testing
Features & Benefits - Bullet 5
Select Gold hardware includes nitrile coated material to help reduce noise
Features & Benefits - Bullet 6
Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
Features & Benefits - Bullet 7
Premium aftermarket replacement part
Features & Benefits - Bullet 8
Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
Friction Material Attachment
Bonded
Friction Material Composition
Hybrid
Good Maintenance Practices - Section 1 - Bullet 1
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4
Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - Header
The following inspections and maintenance procedures can help prevent potential brake problems:
Good Maintenance Practices - Section 2 - Bullet 1
Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4
Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - Header
The following should be conducted by a qualified technician:
Inner Pad Overall Thickness
0.226<br />5.74
Mounting Hardware Included
Yes
Outer Pad Overall Thickness
0.226<br />5.74
Pad Wear Sensor Included
No
Pad Wear Sensor Type
Mechanical
Prepared For Pad Wear Sensor
No
Signs of Wear & Troubleshooting - Section 1 - Bullet 1
Chirping, grinding, or squeaking noises when braking.
Signs of Wear & Troubleshooting - Section 1 - Bullet 2
Difficulty stopping the vehicle.
Signs of Wear & Troubleshooting - Section 1 - Bullet 3
A low or sinking brake pedal.
Signs of Wear & Troubleshooting - Section 1 - Bullet 4
Brake pedal pulsation (not to be confused with normal ABS operation).
Signs of Wear & Troubleshooting - Section 1 - Bullet 5
Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - Section 1 - Header
Brake pad signs of wear include: